Hydraulic Press Brake BP-9078NC

Our largest NC hydraulic press brake weighs 8,800 lbs. with a rigid steel frame. The encoder-controlled stroke and back gauge system offers 2 DROs and takes just 5 minutes to learn. *Delivers up to 90 tons of pressure. *Bends sheet metal up to 78” wide. *10 hp main motor runs on 220-volt 3-phase power. Powerful, Easy-to-Use Hydraulic System *Runs in 3 modes: jog mode for setup, manual mode for more control over descent and return, and automatic mode for full production. *2 encoder-controlled hydraulic cylinders move the top beam. *Digital readout (DRO) displays the position of the downward stroke, so you can fine-tune a bend and make it right every time. *It takes a just few seconds to change the top beam pressure and the top position of the stroke (for more or less travel). *You can set a timer for bend delay to hold the beam down at the bottom of the stroke, so the bend won't lose its shape. *2 hand wheels let you adjust the position of the beam and back gauge for consistency across the entire width of the beam. *Foot pedal brings the stroke up and down, leaving your hands free to position the material. *Motorized back gauge rides on a solid ball screw trolley mechanism. *Back gauge encoder shows its position on its own DRO. *Parallel mechanism on the beam synchronizes the top and bottom die to deliver better quality bends across the entire width of the machine. Rigid Structure and Low Maintenance *Heavy electrowelded frame, made of solid steel, enables this press brake to stay accurate and run smoothly in production for many years. *Upper beam rides on a hardened, stabilizing track, coupled together by 3 axes of bearings, to ensure high accuracy between both dies at any position of the stroke. *Includes a set of hardened single-Vee American tooling. *Accepts standard press brake tooling, giving you a wide variety of options. *Comes with front material rests (or support arms), which some competing machines do not include. *6-light safety curtain helps protect you from injury. This guard stops the machine from running if your hand passes through the light beam. *4 grease zerks let you add oil every few months. *Large hydraulic reservoir on the back allows for convenient fluid changes every 6 to 8 months. Fast Shipping and Lifetime Service *Typically in stock and usually ships in 72 hours. *Most replacement parts are in stock at our Wisconsin headquarters, so we can get them to you without delay. *Comes covered by a 1-year parts warranty. *We provide lifetime technical support by phone. All of our reps have hands-on machine experience. Call us whenever you need help and advice on a project. Recommended for: Industrial shops, maintenance shops, and R&D shops. Questions? Not sure which press brake is right for you? Call us at 1-920-684-4990 and talk to a Baileigh expert.

Features

• Back gauge with DRO
• 220V 3-phase power
• 78” wide
• 90 tons of pressure

Specifications

• Distance Per Stroke (In.): 5.9
• Bending Speed: .236" / sec
• Table Length (In.): 78"
• Stock Number: BA9-1000839
• Motor (HP): 10 hp
• Back Gauge Motor (hp): 1/2 hp
• Minimum Return Speed (In./Sec): 2.36" / sec.
• Approach Speed: 3.14" / sec.
• Shipping Dimensions (L x W x H) (In.): 103x85x100
• Capacity (In.): 90 tons
• Back Gauge Capacity (In.): 23.62"
• Input Power: 220V / 3-phase
• Warranty: 1 Year
• Net weight: 8800.0
• Distance Between Housings: 61
• Throat Depth (In.): 7.87"
• Gross Weight: 8800.0
• Accessories: Included Accessories
• Distance From Table To Ram: 11.81"
• Model Number: BP-9078NC
• Oil Reservoir Capacity (cc): 45 gal