Diagonal Cutting Pliers, Insulated, Slim Handle, 8-Inch

Klein Tools 200028EINS Pliers are Electrician's Insulated High-Leverage Diagonal-Cutting pliers with 1000V rated grips and VDE certification for safety on the job. The multi-color, sleek design with small thumb guards make for easy handling and storage. The three-part insulation with white underlayer provides a warning sign that insulation may be compromised. The durable, molded insulation meets or exceeds IEC 60900 and ASTM F1505 standards for insulated tools.

Warnings

• Only use tools that are marked with the official international 1000-volt rating symbol shown below, if there is any chance that the tools will make contact with an energized source.
• Destroy tool if the insulation is damaged in any way.
• Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
• Keep tool clean, dry and free of any surface contaminants.
• Always inspect your tools before use.
• Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
• Always wear approved eye protection.

Features

• Flame Retardant and Impact Resistant Handle
• Durable, molded insulation meets or exceeds ASTM F1505 and IEC 60900 standards for insulated tools
• Insulated pliers are 1000V Rated for safety on the job and VDE Certified with unique three-part insulation with white underlayer that provides a warning sign when insulation may be compromised
• Made in USA
• Induction hardened cutting knives for long life
• Cuts ACSR, screws, nails and most hardened wire
• Hot-riveted joint for smooth action and no handle wobble
• Multi-color, sleek design with small thumb guards for ease of handling and easy storage in your toolbelt

Specifications

• Handle Finish: 3-Layer Insulation
• Weight: 0.7000 lbs
• Insulated: Yes
• Type: Diagonal Cutting Pliers
• Handle Length: 12.2 cm (4.8 Inch)
• Cut Style: Diagonal-Cutting
• Width: 3.0000 in
• Application: ACSR, Screws, Nails and Most Hardened Wire
• Jaw Width: 1.25 Inch (3.2 cm)
• Jaw Thickness: 0.49 Inch (1.2 cm)
• Nose Type: Tapered
• Cutting Knives: Standard
• Handle Color: Orange/Gray
• Overall Length: 8.15 Inch (20.7 cm)
• Height: 0.4380 in
• Jaw Length: 0.83 Inch (2.1 cm)
• Joint Type: Hot-Riveted
• Depth: 8.2500 in
• Standard: IEC 60900 and ASTM F1505
• Material: Induction Hardened Steel

Downloads

Instructions