Screwdriver Set, 1000V Insulated Slotted and Phillips, 2-Piece

The screwdrivers in Klein Tools' 2-Piece Insulated Screwdriver set have two layers of insulation to protect from electric shock. A thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool, while a bright orange outer coating is flame and impact resistant. Klein insulated tools exceed the IEC 60900 and ASTM F1505 standards for insulated tools, and are clearly marked with the official 1000-volt rating symbol.

Warnings

• Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
• Because moisture, films and other surface contaminants are conductive, Klein insulated tools must be kept clean, dry and free of any surface contamination.
• Do NOT use to pry or chisel.
• Wear approved eye protection. Always inspect your tools before use. Do not use if orange coating cracks, breaks or becomes damaged. Destroy tool if white layer shows through orange layer.
• Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.
• Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized.

Features

• Durable, two-layer, molded insulation
• Insulated screwdrivers reduce risk with work up to 1000 volts
• Cushion-Grip™ handles for greater torque and comfort
• Meets or exceeds IEC 60900 and ASTM F1505 standards for insulation
• Includes non-magnetic tips
• Orange outer coating is flame and impact resistant; white high-dielectric inner coating is bonded to the steel
• Made in USA
• Screwdriver Set includes one 1/4-Inch Cabinet-Tip (Cat. No. 602-4-INS) and one #2 Phillips-Tip (Cat. No. 603-4-INS)
• Flame Retardant and Impact Resistant Handle, Tip-Ident® Handle

Specifications

• Width: 4.7500 in
• Depth: 8.3130 in
• Number of Pieces: 2
• Insulated: Yes
• Handle Color: Black
• Application: For Work Near Energized Sources
• Magnetic: No
• Material: Induction Hardened Steel
• Shank Length: 4" (10.2 cm)
• Standard: IEC 60900 and ASTM F1505
• Overall Length (cm): 18.4
• Handle Material: High-Dielectric Plastic
• Height: 1.2500 in
• Weight: 0.6000 lbs
• Weight (kg): 0
• Overall Length (Inch): 7.25
• Included: (2) Screwdrivers

Downloads

Instructions