Insulated Nut Driver, 1/2-Inch Hex, 6-Inch

Get those hard to reach nuts and bolts with Klein's full hollow shaft nut driver for long bolt applications. Its two layers of insulation protect against electric shock and is individually tested to exceed standards. The bright orange outer coating is flame and impact resistant. Its high-dielectric white inner coating is bonded to the tool for extra toughness.

Warnings

• Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
• Wear approved eye protection.
• Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
• Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.
• Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
• Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.

Features

• Cushion-Grip™ handles for greater torque and comfort
• Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol
• Tip-Ident Quickly Identifies Nut Driver Size
• Two layers of insulation provide protection against electric shock
• Made in USA
• Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications
• Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool with a flame retardant, impact-resistant, bright orange outer coating
• Tip-Ident quickly identifies nut driver size

Specifications

• Overall Length (Inch): 11.375
• Width: 1.0000 in
• Magnetic: No
• Nut Driver Sizes: 1/2"
• Handle Material: High-Dielectric Plastic
• Weight (g): 159
• Color Code: Red
• Shaft Length (cm): 15.2
• Application: Stacked Circuit Boards, Long Bolt Applications
• Standard: IEC 60900 and ASTM F1505
• Insulated: Yes
• Measurement Standard: SAE
• Weight (oz): 5.6
• Material: Steel
• Depth: 11.3750 in
• Weight: 0.3500 lbs
• Shaft Length (Inch): 6
• Overall Length (cm): 28.9
• Height: 1.0000 in
• Type: Hollow

Downloads

Instructions