Non-Contact Voltage and GFCI Receptacle Premium Test Kit

SKU: KLNCVT1XTKIT
Available for Backorder

Klein Tools Non-Contact Voltage and GFCI Receptacle Premium Test Kit (Cat. No. NCVT1XTKIT) includes a Non-Contact Voltage Tester and a GFCI Receptacle Tester. The Non-contact Voltage Tester (Cat. No. NCVT1XT) detects voltage 70 to 1000V AC, is dustproof and waterproof with an IP67 rating, and has durable 9.8-Foot (3 m) drop protection. The GFCI Receptacle Tester (Cat. No. RT210) is designed to detect the most common wiring problems in standard and GFCI receptacles.

Features

  • Voltage Tester provides non-contact detection of 70 to 1000V AC in cables, cords, circuit breakers, lighting fixtures, switches, non tamper-resistant outlets and wires
  • When voltage is detected, a high intensity, bright red LED illuminates and an audible tone will sound
  • Volt Pen with high intensity, bright green LED indicates the tester is powered on
  • CAT IV 1000V safety rating, low battery indicator, and easy access to battery compartment
  • CAT II 300V safety rating, works on GFCI outlets, and confirms operation of the ground fault protective device
  • GFCI Tester detects the most common wiring problems in standard and GFCI receptacles: open ground, reverse polarity, open hot, open neutral, hot/ground reversed
  • Durable tester is dustproof and waterproof with an IP67 rating and 9.8-Foot (3 m) drop protection
  • NCV Tester is not recommended for testing tamper-resistant outlets; use Cat. Nos. NCVT-2P or NCVT-3P in low voltage mode
  • NCVT1XT: Dustproof and Waterproof; Low Battery Indicator; Easy Access Battery Compartment; RT210: Convenient Chart on the Tester; Includes GFCI Tester

Warnings

  • Never assume neutral or ground wires are de-energized. Neutrals in multi-wire branch circuits may be energized when disconnected and must be retested before handling.
  • Always wear approved eye protection.
  • Read, understand, and follow all warnings, cautions, safety information, and instructions in this manual before operating or servicing this tester. Failure to follow instructions could result in death or serious injury.
  • Always consult a qualified electrician to resolve wiring problems.

Specifications

  • Weight (oz): 4.5
  • Overall Width (cm): 12.1
  • Batteries: NCVT1XT - 2 x AAA
  • Height: 1.5000 in
  • Standard: NCVT1XT: CAT IV 1000V; RT210: CAT II 300V
  • Depth: 9.1300 in
  • Overall Length (cm): 23.2
  • Weight: 0.2810 lbs
  • Type: NCVT1XT - Voltage Tester Pen; RT210 - GFCI and Standard Receptacle Tester
  • Weight (g): 128
  • Width: 4.7500 in
  • Material: Polymer Body and Electronic Components
  • Overall Height (Inch): 1.5
  • Application: NCVT1XT - Non-Contact Detection and Testing of AC Voltage; RT210 - Determine Wiring Condition in Outlet
  • Overall Height (cm): 3.8
  • Overall Length (Inch): 9.13
  • Included: NCVT1XT Non-Contact Voltage Tester; RT210 GFCI Outlet Tester; Instructions; and All Required Batteries
  • Overall Width (Inch): 4.75

Downloads

    Spec Sheet
    Safety Data Sheet

    Instructions

      NCVT1XTKIT_manual_web.pdf
      Regular price $39.60

      Ask An Expert

      • Type Master Sets & Kits
      • Vendor Klein Tools
      • SKU KLNCVT1XTKIT