High Performance - 9100 System DTM Epoxy Mastic - Activators (340 VOC) - 1 Gallon - Fast Cure Activator Gloss Finish 340 VOC

Features

• For fresh or salt water immersion of steel or concrete where water temps do not exceed 125°F (52°C)
• Two-year rust-proof guarantee—maximum corrosion protection
• For air and surface temps of 50-100°F (10-38°C)
• Produces slightly lower gloss than standard activator
• Faster cure to minimize downtime
• Meets USDA requirements for incidental food contact; accepted for use in federally registered Canadian food facilities; <340 VOCs
• Convenient 1:1 mixing ratio – no measuring required
• For air and surface temps of 40-60°F (5-15°C)
• not for use in potable water tanks
• Superior long-term resistance to solvents, chemicals, abrasion and impact
• Recoat in 4 hours at 70°F (21°C) and 50% RH
• Great for use in floor-coating applications
• Direct-to-metal (DTM) self priming formula—adheres to a variety of substrates

Available Sizes

• Five Gallon
• Gallon

For Best Results

• This is a two-component system—order base color and activator separately.

• VOC: 340 g/l
• Activator Type: Fast Cure Gloss
• Recommended Dry Film Thickness: 5-8 mils per coat
• Wet Film to Achieve DFT: 7.5-12.0 mils
• Pot Life: 2-4 hours at 70°F (21°C), 1-2 hours at 90°F (32°C) for 2 gallons
• Dry Times Tack-Free: 4 hours at 70°F (21°C)
• Dry Times Handle: 5 hours at 70°F (21°C)
• Dry Times Recoat: 4 hours to 30 days at 70°F (21°C)
• Mixing Ratio: 1:1 Base to Activator (by volume)
• Weight per Gallon: 12.1-13.2 lbs
• Weight per Liter: 1.4-1.6 kg
• Solids by Weight: 81-83%
• Solids by Volume: 67-69%
• Dry Heat Resistance: 300°F (149°C), color may shift above 150°F (66°C)
• Maximum Immersion Temperature: 125°F (52°C)
• Application Temperature Range: 40-100°F (5-38°C)
• Surface Temperature Minimum: At least 5°F (3°C) above dew point
• Compliance: Meets USDA incidental food contact, accepted in Canadian food facilities
• Usage Limitations: Not for use in potable water tanks
• Application Methods: Airless spray preferred, brush, roller, air-atomized spray
• Recommended Substrates: Steel, concrete, galvanized metal, previously coated, slightly damp surfaces
• UPC: 020066910440
• Color: Fast Cure Activator Gloss Finish

Downloads