High Performance - 9100 System DTM Epoxy Mastic - Available Colors - 1 Gallon - Safety Yellow

For Best Results

• This is a two-component system—order base color and activator separately.

Features

• For air and surface temps of 40-60°F (5-15°C)
• Great for use in floor-coating applications
• For air and surface temps of 50-100°F (10-38°C)
• not for use in potable water tanks
• Convenient 1:1 mixing ratio – no measuring required
• Meets USDA requirements for incidental food contact; accepted for use in federally registered Canadian food facilities; <340 VOCs
• For fresh or salt water immersion of steel or concrete where water temps do not exceed 125°F (52°C)
• Recoat in 4 hours at 70°F (21°C) and 50% RH
• Direct-to-metal (DTM) self priming formula—adheres to a variety of substrates
• Superior long-term resistance to solvents, chemicals, abrasion and impact
• Faster cure to minimize downtime
• Two-year rust-proof guarantee—maximum corrosion protection
• Produces slightly lower gloss than standard activator

Available Sizes

• Five Gallon
• Gallon

• Color: Safety Yellow
• Material: Epoxy with Calcium Borosilicate pigment
• Temperature Range: 40-1006F (5-386C) air and surface
• Maximum Immersion Temperature: 1206F (496C)
• Water Immersion Temperature Limit: 1256F (526C)
• Dry Heat Resistance: 3006F (1496C), color may shift above 1506F (666C)
• Performance - Pencil Hardness: B (7 days), 4H (30 days)
• Performance - Flexibility: >32%
• Performance - Cyclic Prohesion: Rated 10/10 at 2300 hours
• Performance - Impact Resistance: 160 in. lbs.
• Performance - Alkali Resistance: No effect
• Performance - Taber Abrasion: 125 mg loss (1000 cycles)
• Performance - Gloss: 80%
• Mixing Ratio: 1:1 Base to Activator by volume
• VOC Content: <340 g/l
• Dry Film Thickness per Coat: 5-8 mils (125-200 m)
• Recommended DFT: 5-8 mils (125-200 m)
• Practical Coverage at DFT: 130-220 sq.ft./gal (3.2-5.4 m8/l)
• Pot Life: 2.5-3 hours at 756F (246C) for 2 gallons
• Tack-Free Time: 6-8 hours at 706F (216C)
• Handle Time: 6-12 hours at 706F (216C)
• Recoat Time: 16 hours to 30 days at 706F (216C)
• Application Method: Airless spray, air-atomized spray, brush, roller
• Compliance: Meets USDA requirements for incidental food contact, MPI #98 certified
• UPC: 020066914493

Downloads